I just got my 02 SSEi last week and everything has been good except for when i went through the automatic carwash last friday and got some water leaking around the head liner. I did a little investigating on here and read about the drain hoses possibly being obstructed, so i used some compressed air to flush them out but they really didn't seem to be the problem. i noticed today though that when the sunroof is in the all the way closed position it'* almost too low, to the point that there is a gap between the back side of the glass and the car.
When i just slightly raise the sunroof it meets more flush, like in the picture below. This picture below is how the sunroof should look in the "down" position right?
I did notice that these screws in the picture below were loose and when in the down position i can actually push up on the glass and cause it to move due to these screws being loose.
The car'* going to the dealership tomorrow to have an unrelated issue corrected. Is it possible that this leaking could be due to the sunroof frame being loose and not being aligned properly? Thanks alot for any input or ideas.