SES codes jumping
#41
Member
Posts like a V-Tak
Thread Starter
i don't think i would trust buying a fuel pump from a salvage yard i think i would rather spend the 211.99$.at rockauto if i need a fuel pump..I guess you can't buy the pump seperately from rockauto either.
#43
Member
Posts like a V-Tak
Thread Starter
#45
Member
Posts like a V-Tak
Thread Starter
FIXED!!!. After all the test I did and the mechanic and they all passed the only one that misguide me were the wires! Spraying water on them while car running showed no spark even in the dark..The mechanic pulling each one off the coil with motor running and showed strong spark! Constantly taking them out and inspecting them did not show signs of wear or kinks. What I did was before spending more money I looked for a old pair of wires I had laying around just like the other swaps I did ICM, Coils I decided to change them and take it for a run I pushed it and at first ran smooth but ses light starting flashing pulled code it changed to p0306 from p0300 this was a good sign! I drove the car straight to Napa and picked up a pair of belden wires install them ran the car punching it hard no more misfires! I just wanted to post this because I read threads here with cars with the same problem and no conclusion at least not posted.. Everyone is very helpful here Dan, Bill, Kevin to name a few they keep our trouble shooting going and the end results should be posted.
Thread
Thread Starter
Forum
Replies
Last Post