oil pressure
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Sep 2006
Location: New Orleans, LA
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
oil pressure
What is standard oil pressure for this car? I'm sitting at 120psi. This seems high. The guage shuts off when the car does and does the normal motion upon start up.
Thanks,
Thanks,
#2
Senior Member
True Car Nut
Join Date: Jul 2006
Location: Granville, Ohio ~NEBF '07 Survivor~
Posts: 5,001
Likes: 0
Received 0 Likes
on
0 Posts
yeah, that'* very high, but don't worry, because it sounds like your sender'* busted. Don't worry, it'* a pretty easy fix, but I don't know a dang thing about 00+, so hopefully someone else will chime in.
#4
RIP
True Car Nut
OK, talked me into it. I think the old link I posted is broken due to Yahoo moving things around. It does sound like the oil pressure sender is bad. Some get it from underneath, others find it easier from the passenger side wheel well, after removing the tire. Probably easier while changing the oil, as you'll loose a little oil.
#5
DINOSAURUS BOOSTUS
Expert Gearhead
Honestly..if the car isn't running...most of the oil is in the pan. Oil loss is minimal.
Due to where the transmission is located as it passes behind the motor to the axle.. I found it easy to remove the tire and splash shield.
Due to where the transmission is located as it passes behind the motor to the axle.. I found it easy to remove the tire and splash shield.
#7
Retired
Autozone $35.99
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
#8
DINOSAURUS BOOSTUS
Expert Gearhead
Originally Posted by ClayKreiling
how much is the sender?
Google and the name of your local stores will do the work for you.