Rear Passenger Side Plastic Moulding around wheel well crack
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Dec 2005
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Rear Passenger Side Plastic Moulding around wheel well crack
Does anyone know where I can get a new piece of plastic that covers the front portion of the rear passenger-side wheel well and part of the rear passenger door a on a 2001 SSEi? Mine got in a fight with a curb and lost. Not a major part but an ugly crack nonetheless. It does not span the entire side underneath the two passenger doors, just heads down the front part of the wheel-well a short distance and then covers a portion of the rear passenger door underneath (has 2 or three little vents or ducts under it for letting out water I assume. I can send a pick if necessary. Thanks
#3
Junior Member
Posts like a Ricer Type-R
My magic book shows that as a single piece from mid-rocker (Bpillar) to the wheelweel and up. Not just the wheelwell trim itself. Can you confirm?
If this is correct, your part number and price at www.gmpartsdirect.com is:
3 cliips of p/n 25724529 will be included with the rocker molding, but the other clip 25704001 (need 3) will not be included. Assuming yours don't break, you won't need these.
Molding is paint to match.
If this is correct, your part number and price at www.gmpartsdirect.com is:
GM PART # 88890019
CATEGORY: All
PACK QTY: 1 CORE CHARGE: $0.00
GM LIST: $120.80
OUR PRICE: $71.27
DESCRIPTION: MOLDING
CATEGORY: All
PACK QTY: 1 CORE CHARGE: $0.00
GM LIST: $120.80
OUR PRICE: $71.27
DESCRIPTION: MOLDING
Molding is paint to match.
Thread
Thread Starter
Forum
Replies
Last Post