Fuel Injector Sight Shield
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Oct 2002
Location: Groton, CT _NEBF 05, 06, 07_
Posts: 2,703
Likes: 0
Received 0 Likes
on
0 Posts
Fuel Injector Sight Shield
When looking at the fuel injector sight shield (L36), does anyone know if there is a grommet insert on the rear locating bracket that the extension piece fits into? I just brought car home after oil change & other service and when raise the hood to look things over it appears that the extension piece on the shield (near firewall) that slips into the bracket is loose, sort of floating, and can be pulled out of location very easily. It seems as if something is missing there, but I can't say for sure. If anyone with a new bonnie (L36) can raise their hood to look & see what the deal is I would be very grateful.
#2
Member
Posts like a V-Tak
Join Date: Aug 2002
Location: Virginia
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
I just looked at mine and it is similar to what you described. The extension from the cover does have a rubber cap on it, but the bracket with the hole it fits into does not have a grommet. It is also kind of a loose fit and moves around quite a bit. I guess that is just normal.
#3
Senior Member
True Car Nut
Thread Starter
Join Date: Oct 2002
Location: Groton, CT _NEBF 05, 06, 07_
Posts: 2,703
Likes: 0
Received 0 Likes
on
0 Posts
Thanks alot for the info, Mario. I'll have to go back to dealership to see what'* up with that. I've had probs before with these guys. It seems like every time I take the car in for service it, comes out with a few pieces missing, or loose hardware or something else not right.
Thread
Thread Starter
Forum
Replies
Last Post