Windshield seal - help needed
#1
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: Apr 2007
Location: North Carolina
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Windshield seal - help needed
Sorry if this is in the wrong forum... not sure if this is general or year-specific tech stuff.
Noticed today that along the bottom of my windshield, the rubber strip (exterior) is not sealed tight with the windshield for about 10 inches on the driver side. Is there are easy, safe fix for this?
I know the instrument cluster was replaced (due to a faulty gauge) before I bought it.. the two shouldn't have any relation should the... or could they?
2004 SE
Thanks
Noticed today that along the bottom of my windshield, the rubber strip (exterior) is not sealed tight with the windshield for about 10 inches on the driver side. Is there are easy, safe fix for this?
I know the instrument cluster was replaced (due to a faulty gauge) before I bought it.. the two shouldn't have any relation should the... or could they?
2004 SE
Thanks
#2
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: Apr 2007
Location: North Carolina
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
yeah, sorry.. please disregard that last post.
popped the hood, there was just a screw missing. i'll pick one up tomorrow.. when i held it in place, the seal was tight.
i'm pretty dumb. sorry.
popped the hood, there was just a screw missing. i'll pick one up tomorrow.. when i held it in place, the seal was tight.
i'm pretty dumb. sorry.
#4
Senior Member
Posts like a Turbo
Join Date: Sep 2006
Location: Tampa, Florida, USA
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
Ya know, I noticed that the black plastic part down where the wipers sit doesn't touch my glass anymore either. I think its been that way since I had the windshield replaced. I never thought it was a problem, is it?
#5
Senior Member
Posts like a Corvette
Join Date: Nov 2005
Location: Hamilton, Ontario , Canada
Posts: 1,201
Likes: 0
Received 0 Likes
on
0 Posts
If your talkin about the cowl you may be missing couple of those pin inerts, I was missing a couple and got them at the dealer .
#6
Senior Member
Posts like a Camaro
Join Date: Mar 2004
Location: Waterloo, NY
Posts: 809
Likes: 0
Received 0 Likes
on
0 Posts
Mine is the same way since I had my windshield replaced. I have all of the retainers in place, it is just that the windshield doesn't come out as far at the bottom as it did before, or so it seems...
Thread
Thread Starter
Forum
Replies
Last Post
GunsOfNavarone
General GM Chat
3
11-11-2014 07:41 AM