Instrument Cluster: Will it Work???
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Feb 2003
Location: SE Virginia
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
Instrument Cluster: Will it Work???
Does anyone know if a 2001 Instrument Cluster P/N 09391512 will work in my 2000 SSEi? This looks like the same SSEi cluster w/ DIC that I have in my car now...just a year newer. My IC backlights are failing, and I found the 2001 unit from a salvage yard.
Thanx/
Jim
Thanx/
Jim
#2
Junior Member
Posts like a Ricer Type-R
Should be the same cluster from 2000 thru at least 2002 according to my book.
Let me know if that doesn't pan out. I have one available at a local wrecker from a 2000 SSEi. Windshield was broken, car has been there 3 years, but it looks only dusty, not water damaged.
Let me know if that doesn't pan out. I have one available at a local wrecker from a 2000 SSEi. Windshield was broken, car has been there 3 years, but it looks only dusty, not water damaged.
#3
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Purgatory
Posts: 6,313
Likes: 0
Received 0 Likes
on
0 Posts
Yes it will work same schematic for both years so imagine same part #?
curious too know what to got the cluster for, gm parts direct does not have one.
There must be away to break in and get at those lights, I would like to try but need a spare unit to tinker with.
curious too know what to got the cluster for, gm parts direct does not have one.
There must be away to break in and get at those lights, I would like to try but need a spare unit to tinker with.
#4
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Feb 2003
Location: SE Virginia
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the replies. As it turns out, the one i thought I had didn't come from a SSEi, so no deal. The hunt continues.....
Jim
Jim
#6
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Purgatory
Posts: 6,313
Likes: 0
Received 0 Likes
on
0 Posts
Just found a little oops, I have the canadian version the speedo goes to 220 on mine for the metric Kmh. So there is more than one part # but only one schematic, the pcm must control the scaling?
Thread
Thread Starter
Forum
Replies
Last Post
BonnevilleSSEGuy
General GM Chat
1
01-01-2004 02:35 PM
givemebreak
Everything Electrical & Electronic
13
11-10-2003 08:01 PM