How to replace!?!??! NEED TO KNOW ASAP!!!
#1
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Dec 2005
Location: jersey
Posts: 740
Likes: 0
Received 0 Likes
on
0 Posts
How to replace!?!??! NEED TO KNOW ASAP!!!
Hey guys, I found out that my oxygen sensor went so I need to get a new one. Thing is I don't know were its located, what I need to take the old one out and put the new one in. I was wondering if anyone had any picture guide or a good write up?
thanks
-Erich
thanks
-Erich
#2
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Dec 2005
Location: jersey
Posts: 740
Likes: 0
Received 0 Likes
on
0 Posts
Can't figure how to take the cover off it either how does that come off? theres these purple things holding a cover.
16 views and not one asnwer..
16 views and not one asnwer..
#3
first of all, don't complain it you dont get instant results, that will get you nowhere fast.
you need to learn to search
what cover are you talking about? the engine cover? you don't need to take that off for this.
the o2 sensor is located on the rear manifold. rent one of these sockets from Autozone to get the old sensor off, and to get the new one on. as long as you can get to it, its a very simple job.
you need to learn to search
what cover are you talking about? the engine cover? you don't need to take that off for this.
the o2 sensor is located on the rear manifold. rent one of these sockets from Autozone to get the old sensor off, and to get the new one on. as long as you can get to it, its a very simple job.
#4
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Dec 2005
Location: jersey
Posts: 740
Likes: 0
Received 0 Likes
on
0 Posts
did a seach just now and actaully doesn't help me out on my 2nd question I had...
already have the tool borrowed from autozone..
Now again...There is this cover covering the sensor plus the wires. It has these purple circle things holding them in. I don't know how to take the cover off. Am I suppose to get a drill and a bigger drill bit then the hole thats on the purple thing and drill it to break it off or no? and if so how can I put my cover back on without them..
already have the tool borrowed from autozone..
Now again...There is this cover covering the sensor plus the wires. It has these purple circle things holding them in. I don't know how to take the cover off. Am I suppose to get a drill and a bigger drill bit then the hole thats on the purple thing and drill it to break it off or no? and if so how can I put my cover back on without them..
#6
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Dec 2005
Location: jersey
Posts: 740
Likes: 0
Received 0 Likes
on
0 Posts
Ok pics are of the cover, and exactly what sensor I am talking about...
you can see what I mean by the purple things, picture is really crappy on were the sensor is but its the one right next to the converter..
you can see what I mean by the purple things, picture is really crappy on were the sensor is but its the one right next to the converter..
#10
i'd keep it on, it protects the o2 and wiring from anything you drive over.
you should be able to pull those out in 1 piece, if not, try and find some generic ones at the parts store.
you should be able to pull those out in 1 piece, if not, try and find some generic ones at the parts store.