K&N filter instalation
#1
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: Feb 2006
Location: Muskego Wisconsin
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
K&N filter instalation
I cannot figure out how to remove the cover for the air cleaner on my 2000 Bonneville SE. Any tips would be great. I am trying to put in a K&N Filter and I need to install the gasket that came with it to the air box end closest to the throttle body.
#4
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: Feb 2006
Location: Muskego Wisconsin
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for your help, I would also like to know how to remove the air box cover and intake hose from the throttle body.
#5
RIP
True Car Nut
I've found it easier to remove the intake hose first. There'* a hose clamp on the box side. Loosen that. The part on the trottle body just pops off. Sqeeze the hose together, being careful not to scrape along the MAF screen on the trottle body, and pull off. Don't forget to disconnect the IAT plug first. Then, the box is a lot easier to take apart.