Which Magnaflow parts?
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Sep 2003
Location: Minneapolis, MN
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Which Magnaflow parts?
I'm looking at opening up my exhaust. Can someone tell me which Magnaflow stainless mufflers and high-flow cat are replacements for the stock parts? I'm wondering if it would it be best to go 2.5" throughout?
Also, can anyone recommend a good/fair exhaust shop in the Twin City area?
THanks guys!!
-Mandible
Also, can anyone recommend a good/fair exhaust shop in the Twin City area?
THanks guys!!
-Mandible
#3
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Fitchburg Ma _ToastedRice_
Posts: 6,837
Likes: 0
Received 0 Likes
on
0 Posts
If you just take it to a local shop they will point you in the right direction for parts, you dont really need factory replacement since you are doing a custom job anyways.. universal stuff will fit. The mufflers will need to be center in and center out tho
#4
Member
Posts like a V-Tak
Join Date: Apr 2005
Location: Iowa
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by toastedoats
If you just take it to a local shop they will point you in the right direction for parts, you dont really need factory replacement since you are doing a custom job anyways.. universal stuff will fit. The mufflers will need to be center in and center out tho
#5
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Sep 2003
Location: Minneapolis, MN
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the info fellas. I'm thinking of picking up a set of these:
http://cgi.ebay.com/ebaymotors/ws/eB...category=33636
THere'* also 5x8", would those be better than 4x9" or will it not matter if I go custom 2.5" pipe?
Thanks!
_Mandible_
http://cgi.ebay.com/ebaymotors/ws/eB...category=33636
THere'* also 5x8", would those be better than 4x9" or will it not matter if I go custom 2.5" pipe?
Thanks!
_Mandible_
#6
Member
Posts like a V-Tak
Join Date: Apr 2005
Location: Iowa
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mandible
Thanks for the info fellas. I'm thinking of picking up a set of these:
http://cgi.ebay.com/ebaymotors/ws/eB...category=33636
THere'* also 5x8", would those be better than 4x9" or will it not matter if I go custom 2.5" pipe?
Thanks!
_Mandible_
http://cgi.ebay.com/ebaymotors/ws/eB...category=33636
THere'* also 5x8", would those be better than 4x9" or will it not matter if I go custom 2.5" pipe?
Thanks!
_Mandible_
Thread
Thread Starter
Forum
Replies
Last Post
Dutch2005
Performance, Brainstorming & Tuning
3
08-11-2005 05:18 AM
CmptrNerd
Performance, Brainstorming & Tuning
21
12-10-2004 12:38 AM
BusMaster007
Performance, Brainstorming & Tuning
10
03-11-2003 10:33 PM