No heat
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: May 2009
Location: Memphis,Tn
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
No heat
I dont know what has happened but my heat will not blow hot, when i turn on the defrost its freezing cold and my dash vents wont blow out anything only on the floor, now the vents in the backseat blow fine what could it be? termostat?
And one more question do i have air shocks on the back of my bonniville? I ask because i am sittn really low in the back to the point when i back or pull out the drive im scrapping the muffler
And one more question do i have air shocks on the back of my bonniville? I ask because i am sittn really low in the back to the point when i back or pull out the drive im scrapping the muffler
#3
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: May 2009
Location: Memphis,Tn
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
ok and thats to see if the vents arent blowing correctly? or is that y my heat isnt blowing? and how do i remove the glove box lining jus pull forward?
#4
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
The liner just clips in if I remember right.
The part behind the glove box is what needs to be checked for no heat. There are other actuators that control where the air comes out. If none of these are working then you will want to check the vacuum line that controls the whole HVAC system.
The part behind the glove box is what needs to be checked for no heat. There are other actuators that control where the air comes out. If none of these are working then you will want to check the vacuum line that controls the whole HVAC system.
#5
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: May 2009
Location: Memphis,Tn
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
ok thanks im goin to check that 2marro because it is late tonite bt if thst doesnt work or isnt the prblm ima proly hafta take it to a shop because i have no clue bout the other things
#6
No heat
So found out the Bonnie I just bought has little to no heat. Blows cool air out of all places. Good thing it is spring. Engine temp looks fine so based on all the reading I have done on this forum seems to be I need to check the mix actuator behind glove box and/or flush heater core. Is the mix actuator pretty straight forward? Turn on the heat and some lever should change position right? Can I move it manually? How big a job is it to replace? Thanks for the help.
Thread
Thread Starter
Forum
Replies
Last Post