Front Gel filled motormount
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Jul 2003
Location: Westerville, Ohio 2000 Black SSEi
Posts: 6,127
Likes: 0
Received 1 Like
on
1 Post
Front Gel filled motormount
Looks like mine needs replaced. Anyone have a part number for this, and is it very hard dto change out? (directions?).
#5
Senior Member
True Car Nut
Join Date: Nov 2002
Location: Texarkana, Texas
Posts: 6,042
Likes: 0
Received 0 Likes
on
0 Posts
#7
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Purgatory
Posts: 6,313
Likes: 0
Received 0 Likes
on
0 Posts
Yup you want the solid motor mount, SilverBullet made his out of aluminum and I made mine out of alumized wear plastic with top and bottom urethane bushings. I also used 3" cup washers. No regrets after 3000 miles.
I'll try and get a pic this evening.
I'll try and get a pic this evening.
#9
Senior Member
Certified GM nut
Join Date: Jul 2003
Location: Chicagoland
Posts: 1,712
Likes: 0
Received 0 Likes
on
0 Posts
Hum, mine needs replacing too.
Any of you guys feel a vibration in the gas pedal like Todd and I do during spirted driving?
My car is actuall at the dealer right now, for that problem and few other small things, let you know what they find.
Any of you guys feel a vibration in the gas pedal like Todd and I do during spirted driving?
My car is actuall at the dealer right now, for that problem and few other small things, let you know what they find.
#10
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Purgatory
Posts: 6,313
Likes: 0
Received 0 Likes
on
0 Posts
Heres a pic of my mount and a recent pic of the engine bay. The mount is easy to make and cost very little. No need to jack the engine up or use jack stands, just remove the mount off the engine (you can see 2 bolts in the upper right) and the bottom nut below the cross brace the mount sits on.
I'll have the cai done soon, week or two.
I'll have the cai done soon, week or two.