SES Light came on today....
#1
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Aug 2003
Location: Toledo, Ohio
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
SES Light came on today....
.....so I went to Autozone and had them scan it. Some wierdo code came up on it and the little book there said this: Purge or Vent Solenoid. The guy there said it was for the intake manifold and that I would have to get the part from the dealer because he has no way to get it. Anyone here have an idea as to if I can fix this myself and is it hard to get to or do? Also I called the local Pontiac Dealer and they want 22.68 for the part. Thanks in advance! Brad
#3
RIP
True Car Nut
You should be able to replace it yourself. The directions are:
1. Remove the fuel injector sight shield.
2. Disconnect the electrical connector and the hoses from the EVAP purge valve.
3. Bend the tab on the purge valve mounting bracket in order to remove the EVAP purge valve.
4. Remove the EVAP purge valve from the bracket.
INSTALLATION PROCEDURE
1. Bend the tab on the purge valve mounting bracket in order to install the valve.
2. Install the EVAP purge valve.
3. Connect the hoses and the electrical connector to the EVAP purge valve.
4. Install the fuel injector sight shield.
It'* on the back side of the intake to left of the EGR and PCV valves as you're facing the car from the front.
1. Remove the fuel injector sight shield.
2. Disconnect the electrical connector and the hoses from the EVAP purge valve.
3. Bend the tab on the purge valve mounting bracket in order to remove the EVAP purge valve.
4. Remove the EVAP purge valve from the bracket.
INSTALLATION PROCEDURE
1. Bend the tab on the purge valve mounting bracket in order to install the valve.
2. Install the EVAP purge valve.
3. Connect the hoses and the electrical connector to the EVAP purge valve.
4. Install the fuel injector sight shield.
It'* on the back side of the intake to left of the EGR and PCV valves as you're facing the car from the front.
#4
Senior Member
True Car Nut
Join Date: Oct 2002
Location: Groton, CT _NEBF 05, 06, 07_
Posts: 2,703
Likes: 0
Received 0 Likes
on
0 Posts
Re: SES Light came on today....
Originally Posted by Boberle1150
the little book there said this: Purge or Vent Solenoid. Brad
Thread
Thread Starter
Forum
Replies
Last Post
harofreak00
Your Ride: GM Pictures & Videos
25
03-08-2006 09:01 AM