Just my personal preference but the standard tips from the SSEi exhaust system I bought looked very goofy on my '00 SE, due to the fact that there are no cutouts in the rear fascia for them. But hey, to each his own I say.
I cut them off right at start of the exhaust tip and they have just enough reach to exhaust out past the rear-end of the car.
That'* exactly what I would do.
Make a couple of straight stainless pipes....you may have to bend them slightly...but use 2 1/2" and slip it over the muffler exit 2" outlets. Any muffler shop can swage the pipes so they can be MIG to TIG welded.
For that custom look, bevel the ends of the SS pipes.
It appears that the Bullet'* Bosals will remain in Canada.