Drivers Door Module???
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Sep 2006
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Drivers Door Module???
So ive read through some of the posts on this topick but still dont 100% sure. On my car all the windows work from the drivers door control except for the drivers window. When you flick the switch I can hear the module click but doesnt do anything. Just replaced the regulator and motor, and checked the fuses and they are all fine. I was able to manualy raise it when I spliced in a 12 volt converter so the motor works.
one other some what related part is the seal is realy tight on the passenger window. Is there a way to lube or loosen the rubber seal to let the window slide easyer?
one other some what related part is the seal is realy tight on the passenger window. Is there a way to lube or loosen the rubber seal to let the window slide easyer?
#2
Senior Member
True Car Nut
Check the voltage at the regulator.
Is this a regulator out of another car, or a new one?
The regulator should have enough power to get the window up, even with some stiff or dried up window seals. If you lube the seals to allow the window to work better, then you'll grease your window up.
Is this a regulator out of another car, or a new one?
The regulator should have enough power to get the window up, even with some stiff or dried up window seals. If you lube the seals to allow the window to work better, then you'll grease your window up.
Thread
Thread Starter
Forum
Replies
Last Post
2000BLKBONNEVILLE
Everything Electrical & Electronic
0
09-10-2009 12:43 PM
reagle
2000-2005
4
07-15-2008 09:29 AM
bill buttermore
Everything Electrical & Electronic
12
04-28-2004 11:36 AM