IAC
08-07-2007, 08:44 AM
#4
Senior Member
Posts like a Northstar
Join Date: Apr 2007
Location: Edinboro, PA
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
They often get dirty from the intake. They shouldn't make noise. If it'* clicking that may means it'* jammed and won't go in and out and control the idle like it should.
08-08-2007, 02:41 PM
#6
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Jul 2005
Location: Cincinnati, Ohio
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
I pulled the IAC to clean it and it flew apart. The threaded shaft popped out under tension from the spring. Should it come apart like that ?
08-11-2007, 01:13 PM
#8
Senior Member
Posts like a Turbo
Join Date: May 2007
Location: Sycamore, IL (ILRt. 64 and ILRt. 23)
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
Make sure you clean out the seat and inwhere the IAC goes before you put the new one in. I use que-tips and carb cleaner until I get virtually not residue on the que-tip.
08-12-2007, 04:47 PM
#9
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Jul 2005
Location: Cincinnati, Ohio
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
I pushed the pintle shaft back in and it clicked back in the hole. I reinstalled it until I could get a new one, and there seems to be no problems.
What problems would a bad IAC cause?
What problems would a bad IAC cause?