can you name these tranny parts?
#11
Senior Member
Posts like a Northstar
Join Date: Oct 2009
Location: Boston Mass
Posts: 684
Likes: 0
Received 0 Likes
on
0 Posts
I read something on the FAQs on an automatic transmission site recently;
Q, I've just dropped my trans oil pan anf found some odd bits in it, the trans works fine though, what happened?.
A, Congratulations!, you are the first one to remove the pan on your car. When the car is on the assembly line the transmissions have plugs in the oil filler orifice, it is pushed into the pan when assembled onto the car and does no harm.
Doesn't look like a plug you have found though, is the trans working normally?.
Q, I've just dropped my trans oil pan anf found some odd bits in it, the trans works fine though, what happened?.
A, Congratulations!, you are the first one to remove the pan on your car. When the car is on the assembly line the transmissions have plugs in the oil filler orifice, it is pushed into the pan when assembled onto the car and does no harm.
Doesn't look like a plug you have found though, is the trans working normally?.
#12
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2009
Location: Green Bay, WI
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
i took the suspect piece to my local tranny shop to mount an investigation , he quoted me about $200 for repair, he was very very persistent that I'm missing a gear.....nope.
got em all
got em all
#13
DINOSAURUS BOOSTUS
Expert Gearhead
Darn..late to the party. Totally with the guys on teh temp sensor piece of flat metal. Likely it' got bumped and fell.
Can you please get a picture or 10 with the pan down. I'm sure that'* not a dowel pin from a band (recently pulled a few and it looks like a hex headed short bolt). That definately looks like a piece of the case.
Can you please get a picture or 10 with the pan down. I'm sure that'* not a dowel pin from a band (recently pulled a few and it looks like a hex headed short bolt). That definately looks like a piece of the case.
Thread
Thread Starter
Forum
Replies
Last Post
douglashaber
Lounge
4
01-27-2003 08:09 AM