Aux port
#21
Member
Posts like a V-Tak
Very true your better off getting an out the box ready setup, but to be honest anything just about anything at best buy with bluetooth is way over priced
#23
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2011
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
well i ended up getting a Sony MEXBT3000P in-dash CD deck thats got bluetooth already in it. Also its got pandora control so you can control your pandora on the phone through the radio remote. Well yesterday i got my last package which had the dash kit. Earlier this week i got the antenna adapter and wiring harness. So now i have to figure how to wire it all up. Do you know any good write ups about doing the wiring harness?
#24
Member
Posts like a V-Tak
Bluetooth deck for a $129 ya did good. Its super easy, with the quick connect kit the wires on the harness 99% of the time are exactly the same color as the radio harness so just match the colors and butt connect and once your done it'll plug right into the factory harness
#27
Member
Posts like a V-Tak
@jwfirebird, I concur when i was working as a fleet mechanic(everything from a leaf blower to ranger to f-750 to a back hoed john deere) for the SD Zoo the minimum excepted was a naked butt connector, soldered, heat shrunk and for cosmetic crinkle tube. Excessive but you can always rule your connection out if there'* a issue
#28
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2011
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
So im looking at my wires now and only thing I don't haveon the cd player is the orange wire and the orange white wire. So if its not on the cd plalyer harness do I need them? And also I seen somewhere you need to run an additional power wire.
#29
Senior Member
True Car Nut
orange should be your always on test it with a meter, and yellow the retained acc power. dont know about orange /white. did you have something for amp turn on?
#30
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2011
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
well went to go and install everything and found out that i got the wrong connector for the harness. i ordered the one on the amazon link but i guess it was the wrong one. heres a picture of it