No spark! What am I missing here?
#1
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Aurora, CO
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
No spark! What am I missing here?
I just replaced the timing set on my 2000 Bonneville SSEi. The engine cranks, but will not start. It is getting fuel but not spark. What am I overlooking here?
#3
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Aurora, CO
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
One of the coil packs are loose, but it was that way before I did anything with the car. I made sure I put the magnet on the new cam sprocket. I am positive that the timing marks are lined up correctly and I am pretty sure that I got all the sensor wiring re-connected. I also replaced the crank sensor, but I did that right before I replaced the timing set, and the car ran fine right before I tore it apart. I double checked all the sensors and ground wires and everything seems to be in order. I also checked all the fuses for the ICM and Ignition, which were all ok.
Thread
Thread Starter
Forum
Replies
Last Post
buickpower3800sc
Performance, Brainstorming & Tuning
4
03-15-2003 04:27 PM