2002 bonneville front end shake/vibration
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Feb 2013
Location: ct
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
2002 bonneville front end shake/vibration
..i've been getting a vibration/shaking whenever i'm on the highway and vearing right..whenever i drive straight or vearing left no problems it was light at first but has been getting worse the more i drive changed front bearings rotors and brakes still have the shake/vibration.. what could be causing that and possible solutions
The following users liked this post:
GunsOfNavarone (10-24-2013)
#4
Retired Administrator
True Car Nut
Is there a speed that this primarily occurs at? Our Bonneville platforms, along with GM sister platforms on the Cadillacs and Buicks all share a common vibration problem fron 60-75 miles per hour.
Your issue appears different, as it only occurs when veering to the right. After the tires are eliminated as a possible problem, I would be looking at wheel bearings, tie rods and possibly a proken sway bar end.
Your issue appears different, as it only occurs when veering to the right. After the tires are eliminated as a possible problem, I would be looking at wheel bearings, tie rods and possibly a proken sway bar end.
#5
Senior Member
True Car Nut
He already replaced bearings.
My Bonneville does this once in a while. Every time it does I find there is a 3 or 4 psi difference in air pressure between the 2 front tires. I bring that both back to the proper pressure and the vibration goes away. This may not be your problem, but sometimes you have to check the simple stuff.
My Bonneville does this once in a while. Every time it does I find there is a 3 or 4 psi difference in air pressure between the 2 front tires. I bring that both back to the proper pressure and the vibration goes away. This may not be your problem, but sometimes you have to check the simple stuff.
#6
Senior Member
Certified GM nut
I'm keeping an eye on this thread. I'm having a similar problem in my Century..new bearings and brakes, etc, and it still vibrates when turning right..
#7
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Feb 2013
Location: ct
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
yes it'* not a ticking/clicking sound you will hear in a bad cv axel it'* more of a bad shaking whenever veering right i'm thinking maybe a bad shock or bad tie rod end or ball joint just my guess was looking for a more professional opinion
#8
Retired Administrator
True Car Nut
Buick Park Ave, LeSabre
Cadillac Seville, DeVille
Olds Aurora
These vehicles all share one major common issue- vibration from the front end while driving. What they don't share is the cause of the vibration. Vibration is most notable between 60-75 miles per hour.
The vibration has caused dealers and GM engineers much frustration. Seems every fix identified for one vehicle, did not solve the issue for another vehicle with the same symptom.
Fixes have included replacing tires, wheels, alignments, wheel hubs- the list goes on and on. No dealer will commit to replacement of any part, or any one service as a fix to the vibration. It is a matter of looking for something out of spec and/ or replacing a part and testing to see how the replacement impacted the vibration.
Justin has suggested inspecting/ moving the tires from front to rear. Roy suggested ensuring tire pressures are exactly at proper psi. Those are two low cost and low effort places to start.
There is no professional silver bullet with this problem. Problem is inherit with this platform, and any one of many issues can result in the vibration issue. Many of wealthy Cadillac owners traded in their Caddy because of this issue.
If you are patient I am sure you can identify the cause.
#9
Senior Member
Posts like a Supercharger
..i've been getting a vibration/shaking whenever i'm on the highway and vearing right..whenever i drive straight or vearing left no problems it was light at first but has been getting worse the more i drive changed front bearings rotors and brakes still have the shake/vibration.. what could be causing that and possible solutions
Has the alignment been checked along with the rear alignment settings?
Have the bushings on the A-arms been checked along with the ball joint. That is something that might move with a turn in one direction and not change enough to be noticed with a left swerve, e.g.. Also carefully check the outer and inner tie rod ends.
#10
Senior Member
Posts like a Supercharger
The Bonneville was built on GM'* H- platform (really the G platform but GM continued to label it H). This platform was shared with the two following vehicles: Buick Park Ave, LeSabre Cadillac Seville, DeVille Olds Aurora
These vehicles all share one major common issue- vibration from the front end while driving. What they don't share is the cause of the vibration. Vibration is most notable between 60-75 miles per hour.
These vehicles all share one major common issue- vibration from the front end while driving. What they don't share is the cause of the vibration. Vibration is most notable between 60-75 miles per hour.
GM also switched to Michelin tires. My leSabre came with Symmetry tires same as shipping and being switched on Cadillacs to abate the symptoms.
[quote] The vibration has caused dealers and GM engineers much frustration. Seems every fix identified for one vehicle, did not solve the issue for another vehicle with the same symptom. [/quote
Requires analysis just as all of us here have been suggesting to determine weak spot.
Fixes have included replacing tires, wheels, alignments, wheel hubs- the list goes on and on. No dealer will commit to replacement of any part, or any one service as a fix to the vibration. It is a matter of looking for something out of spec and/ or replacing a part and testing to see how the replacement impacted the vibration.
I'd suggest switching all 4 wheels with a known good set of tires to eliminate those. Of course most of us don't have a 2nd car with same rim bolt pattern nor a tire shop or car dealer willing to switch for testing. But that works to eliminate a belt or wear pattern in tires.
I was fooled by noise and vibration from aged tires and replaced a Timken front wheel bearing on my 98 under warranty. My neighbor, who had worked in a tire store earlier in his shade tree life, could feel the problem was tires when he drove it and felt the tire. Aged belts and hard tread on OLD Michelins.
On my own new 03 leSabre and less than 10K miles with Symmetry Michelins a variable vibration was felt from tires at 62-72 at times, especially under slight acceleration on slight uphill grades (changes the pull on A-arm bushings and alignment slightly) but not on downhill. Service manager checked alignment; rear was off on toe-in, but within the wide specification. That fixed it.
My guess for jonniewalker'* problem if tires are not the fault is play in the front alignment, tie rod ends, ball joint, or wear in the A-arm bushing.
The following users liked this post:
GunsOfNavarone (10-25-2013)