2001SLE LIM gasket replacement
10-30-2008, 12:37 PM
#1
Junior Member
Thread Starter
Join Date: Oct 2008
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
2001SLE LIM gasket replacement
Great forum folks- my compliments
Just realized I was down on antifreeze last night. I've been having a hard time finding some instructions on replacing the LIM gasket and the parts I require. I can't find the tech section, the links don't work and my searches have been unsuccessful in finding some general directions for this job.
btw-learned about the intermediate shaft yesterday and for now got rid of my steering wheel creaking by lubing the upper uni-joint last night.
2001 bonneville SLE
200k
Just realized I was down on antifreeze last night. I've been having a hard time finding some instructions on replacing the LIM gasket and the parts I require. I can't find the tech section, the links don't work and my searches have been unsuccessful in finding some general directions for this job.
btw-learned about the intermediate shaft yesterday and for now got rid of my steering wheel creaking by lubing the upper uni-joint last night.
2001 bonneville SLE
200k
11-11-2008, 11:53 AM
#2
Senior Member
Posts like a 4 Banger
Join Date: Jan 2007
Location: Nebraska
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
This may help you. I did this project last year. Mine is an SSEI but this could apply to yours in some way or another....good luck!!
https://www.gmforum.com/t251448/
https://www.gmforum.com/t251448/
11-17-2008, 01:41 PM
#3
Senior Member
Posts like a 4 Banger
Join Date: Dec 2005
Location: North East, PA
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Try this, there is a good step by step about 4/5 posts down.
https://www.gmforum.com/t254193/
I did mine about a 1.5-2 years ago, and by the looks of it this morning I need to do it again. She started really hard and didn't want to stay running and when she did start she ran fine. Then I came home from lunch and left her sit in the snow, when I left there was quite a bit if anti-freeze on the ground. i'm going to investigate more when I get home tonight.
https://www.gmforum.com/t254193/
I did mine about a 1.5-2 years ago, and by the looks of it this morning I need to do it again. She started really hard and didn't want to stay running and when she did start she ran fine. Then I came home from lunch and left her sit in the snow, when I left there was quite a bit if anti-freeze on the ground. i'm going to investigate more when I get home tonight.
Thread
Thread Starter
Forum
Replies
Last Post