new headlight bulbs
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2004
Location: Edmonton, Alberta Canada
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
new headlight bulbs
Does the whole headlight assembly have to be removed to install new bulbs - mine is a 2003 Booneville.
Thanks
Thanks
#2
Senior Member
True Car Nut
Join Date: Oct 2002
Location: Groton, CT _NEBF 05, 06, 07_
Posts: 2,703
Likes: 0
Received 0 Likes
on
0 Posts
Yes, Remove the two 10mm hex head fasteners on the headlamp. Use gentle force to bring the whole headlamp assembly straight ahead forward in order to disengage the ball stud from the socket. This will give clear access to relamp.
#3
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Purgatory
Posts: 6,313
Likes: 0
Received 0 Likes
on
0 Posts
It maybe a bit tough pulling the headlight assembly forward the ball stud gets a bit dry. Put a dab of petroleum jelly on it before putting it back in to help with the next time.
What brand of light are you installing?
What brand of light are you installing?
#4
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2004
Location: Edmonton, Alberta Canada
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Based on earlier advice, Siverstars were recommended. I also assume both high and low beam should be done. Does Silverstar make bulbs for the fog lights?
Thanks for all the help.
Thanks for all the help.
#10
Senior Member
Expert Gearhead
The images have to be on the web, try www.cardomain.com and set up an account, or www.photobucket.com
Lets see those pics
Lets see those pics