rear inner tie rod
03-18-2004, 10:03 AM
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2004
Location: Easthampton, Ma
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
rear inner tie rod
After a wonderful experience with a disfunctional tow truck driver over the summer I know need to change my driver side rear inner tie rod on my 1994 se 
. I have read over my haynes book on the removal and installation of the part and it just seems foggy. My question is do I need any specail tools to do this and if possible can anyone tell me how they did it so i can maybe understand how to change it a little more clearly? I am not totally out in left field on how to change this but i'd say i am around 3rd base or so if you knwo what i mean. Thanks for any help!
. I have read over my haynes book on the removal and installation of the part and it just seems foggy. My question is do I need any specail tools to do this and if possible can anyone tell me how they did it so i can maybe understand how to change it a little more clearly? I am not totally out in left field on how to change this but i'd say i am around 3rd base or so if you knwo what i mean. Thanks for any help!
03-18-2004, 05:06 PM
#3
Guest
Posts: n/a
once you look at it , it is pretty much straight forward. one thing that you need to do, and if you have any doubts at all about doing it, take it to an alignment shop and have them do it. it will need a 4 wheel alignment when it is replaced also.i bet if you got the part, they wouldnt charge much to change it while its there for a 4 wheel alignment
Thread
Thread Starter
Forum
Replies
Last Post