what happened ?
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Aug 2007
Location: albanel, canada, quebec
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
what happened ?
Well, i bought a 94 bonneville and i remplace the tranny. everything is good but when i start it, it run about 1200 rpm'* and more he heated, more the rpm'* go up... hot he run about 1800 rpm'*. the IAC is nice, the tps voltage too... i think than i see 2 possible problems; vac leak or pcm problem... someone have an idea?
Thx Fred
Thx Fred
#3
DINOSAURUS BOOSTUS
Expert Gearhead
Welcome to the world of the 94.
I agree 100% with your diagnosis of vacuum or PCM. Let'* start off on the easier of the two and check for vacuum leaks. Most likely your lines are original and leaking badly. Also.. consider cleaning the TB in case the throttle plate is sticking open.
After we rule out a few more things..we'll know it'* probably a flukey pcm.
I agree 100% with your diagnosis of vacuum or PCM. Let'* start off on the easier of the two and check for vacuum leaks. Most likely your lines are original and leaking badly. Also.. consider cleaning the TB in case the throttle plate is sticking open.
After we rule out a few more things..we'll know it'* probably a flukey pcm.
#5
DINOSAURUS BOOSTUS
Expert Gearhead
Originally Posted by willwren
What did you replace the trans with? New, rebuilt, or used?
#7
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Aug 2007
Location: albanel, canada, quebec
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
Welcome to the world of the 94.
I agree 100% with your diagnosis of vacuum or PCM. Let'* start off on the easier of the two and check for vacuum leaks. Most likely your lines are original and leaking badly. Also.. consider cleaning the TB in case the throttle plate is sticking open.
After we rule out a few more things..we'll know it'* probably a flukey pcm.
I agree 100% with your diagnosis of vacuum or PCM. Let'* start off on the easier of the two and check for vacuum leaks. Most likely your lines are original and leaking badly. Also.. consider cleaning the TB in case the throttle plate is sticking open.
After we rule out a few more things..we'll know it'* probably a flukey pcm.
#9
DINOSAURUS BOOSTUS
Expert Gearhead
94 & 95 are OBD 1.5 hybrid years. They have an OBD2 connector..they are not full OBD2 though.
When you try swapping PCM'* make sure you change the eprom chip from your original to the new one.
When you try swapping PCM'* make sure you change the eprom chip from your original to the new one.
#10
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Aug 2007
Location: albanel, canada, quebec
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
guys, very cool to have so clear and fast reponses like this i'll check everything soon; i'll give you news !