Error 41 (cam sensor circuit) on bonnie 93 se
#2
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Nov 2002
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Re: Error 41 (cam sensor circuit) on bonnie 93 se
The sensor yet did not change. Usually there is a problem with a magnet, on this has replaced it(him) first of all. What cost of the cam sensor in USA?
#3
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Nov 2002
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Re: Error 41 (cam sensor circuit) on bonnie 93 se
Thanks. At us it costs 80. But at us very cheap turning metal wares. At us in the sanitary technician inch grooves, and in other products metric are used.
Using I have replaced with it the bursted plastic details in system of cooling on metal. The bonneville-toilet bowl has turned out . But it is reliable. Plastic frequently bursts in our conditions.
Moscow. Russia.
Using I have replaced with it the bursted plastic details in system of cooling on metal. The bonneville-toilet bowl has turned out . But it is reliable. Plastic frequently bursts in our conditions.
Moscow. Russia.
Thread
Thread Starter
Forum
Replies
Last Post
Sprig
Everything Electrical & Electronic
3
06-17-2006 10:13 AM