Things I learned this weekend
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Things I learned this weekend
If your car has over 100,000 miles on it, you're way overdue for changing your injector O-rings. All 12. The 6 in the lower intake were grimy on mine, and the 6 in the fuel rail were dry and cracked (on the verge of leaking fuel onto my intake). This is at only 80,000 miles.
If you're going to drill bypass holes in a 180° thermostat, the size of the holes is very dependent on the climate where you live. With the mild climate in Oregon (50°F today) four 1/8" holes was too much. The car is running an average of 169° with the heat off. I'd suggest four 1/16" holes in similar climates to mine, and two 1/16" holes in colder climates. You can always go back later and make them bigger if you need to.
When doing a SC rebuild, drink plenty of beer. It actually makes it fun. It also helps when it'* cool out (45° yesterday) to keep the sealant in your pocket to keep it soft.
If you're going to drill bypass holes in a 180° thermostat, the size of the holes is very dependent on the climate where you live. With the mild climate in Oregon (50°F today) four 1/8" holes was too much. The car is running an average of 169° with the heat off. I'd suggest four 1/16" holes in similar climates to mine, and two 1/16" holes in colder climates. You can always go back later and make them bigger if you need to.
When doing a SC rebuild, drink plenty of beer. It actually makes it fun. It also helps when it'* cool out (45° yesterday) to keep the sealant in your pocket to keep it soft.
#4
Senior Member
True Car Nut
Join Date: Sep 2002
Location: Genoa, Illinois
Posts: 4,013
Likes: 0
Received 0 Likes
on
0 Posts
Damnit will, keep your mouth shut untill I get my nitrous working. You worry me on spending money on just fixing up the engine.....I want boost first!
LOL j/k
Hey, you got a SC...so I deserve a little nitro eh?
LOL j/k
Hey, you got a SC...so I deserve a little nitro eh?
#5
Junior Member
Posts like a Ricer Type-R
Thread Starter
Go for it. When you pull it apart, have the GM injector o-ring kit handy, and about 4 different sizes of vacuum line! Actually, the vacuum won't be as bad for you. There'* a rat'* nest of it on the SC cars.
#8
Junior Member
Posts like a Ricer Type-R
Thread Starter
Jeffrey is right. From the dealer, the kit was only 19 bucks, but had parts I didn't need. All 12 O-rings are the same size. If you buy from a local parts outlet, they'll be cheap.
#9
Junior Member
Posts like a Ricer Type-R
Join Date: Dec 2002
Location: Utah
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
My experience has shown me that while those injectors are out you should take them in and have them flow tested, leak tested and cleaned. Also make sure they put them on a scop during the flow test to make sure the coils are not starting to wear out.
This advice is based off having many high mileage cars and trucks. you wont believe the difference in performace this will make and around my area costs about $50. Worth every dime!!
This advice is based off having many high mileage cars and trucks. you wont believe the difference in performace this will make and around my area costs about $50. Worth every dime!!
Thread
Thread Starter
Forum
Replies
Last Post
Stinger357
2000-2005
11
02-02-2010 09:58 AM