A Little Newbie Help

Reply Subscribe

Thread Tools

Search this Thread

11-11-2007, 08:40 PM

Jeffrey

Member

Posts like a V-Tak

Thread Starter

Join Date: May 2007

Location: Scarborough, ON

Posts: 34

Likes: 0

Received 0 Likes on 0 Posts

A Little Newbie Help

My transmission has been sliipping to the point that it has become a chore to drive. I have to start it in second and shift into third only when the rpm are above atleast 3000. and if i punch it while in 3rd it will go into neutral. when i make it to fourth and punch it the rpm stays at 1500-2500 and the boost gauge is pinned. The codes that came up were

6 40 QDM1
6 70 QDM4

besides the transmission there are no other evident problems with the vehicle

can anyone help me?

Reply Like

11-11-2007, 08:46 PM

banned3800

Guest

Posts: n/a

Would this Be Codes P0640 and P0740

OK... This is Code P0740 ... Here the PCM is seeing a Torque converter clutch Problem

Code P1640 is... QDM 1 Circuit..

This may be related to the Code above ... The PCM is seeing an improper voltage to one of the controlled items on the circuit...

The Boost Control Solenoid, EVAP Purge Solenoid And TCC Apply Solenoids are on this circuit...

__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Reply Like

11-12-2007, 11:20 PM

Jeffrey

Member

Posts like a V-Tak

Thread Starter

Join Date: May 2007

Location: Scarborough, ON

Posts: 34

Likes: 0

Received 0 Likes on 0 Posts

Flipping through the forum i saw that the QDM1 code could be the TCC, which could explain the transmission. any more help before i get my transmission rebuilt unneccissarily

Reply Like