Swapping Interior
08-10-2007, 08:14 PM
#2
Senior Member
True Car Nut
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
Iv done all the seats, Dash, and FE2 suspension on my SE 
Dash is not to hard. its like 14-16 bolts. and about 2-6hours of work all depends on how fast your are.
to do the HUD you do have to mod your stock wiring harness. just 8 wires not to bad.
here is when i did my dash
http://www.bonnevilleclub.com/forum/...=66596&start=0
I did not switch over to a Console switch but i did put the console there.
I did not want to swap my steering column to do the shifter swap.
if you want to do the AL7 good seat swap also.
here is when i did that.
http://www.bonnevilleclub.com/forum/...=65762&start=0
Dash is not to hard. its like 14-16 bolts. and about 2-6hours of work all depends on how fast your are.
to do the HUD you do have to mod your stock wiring harness. just 8 wires not to bad.
here is when i did my dash
http://www.bonnevilleclub.com/forum/...=66596&start=0
I did not switch over to a Console switch but i did put the console there.
I did not want to swap my steering column to do the shifter swap.
if you want to do the AL7 good seat swap also.
here is when i did that.
http://www.bonnevilleclub.com/forum/...=65762&start=0
08-11-2007, 12:41 AM
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: May 2007
Location: Houston, TX
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Bandit, the junk yards around me are filled with Bonnevilles with AL7'*. Was it complicated at all? I am mostly concerned with the dash. Everything just bolted right up in the same places? I can get seats for about $100.00, don't know about the the dash yet.
What is the degree of difficulty for this type of project?
What is the degree of difficulty for this type of project?
Thread
Thread Starter
Forum
Replies
Last Post
Berlinetta92
Your Ride: GM Pictures & Videos
10
09-07-2004 10:47 AM