series 1 TPS mod help
#1
BANNED
Thread Starter
Join Date: Mar 2004
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
series 1 TPS mod help
in regard to this...
http://www.bonnevilleclub.com/forum/...ic.php?t=22830
i figured id give it a shot cuz
1. nothing wrong with being faster...well kinda, anyways
2. some ppl talked about tranny problems being associated with the TPS... so what the hell...
now i get out there with my multimeter...
and if im correct this is my TPS right?
i have my ignition on, and i can get 12v from the battery, but i get nothing out of the TPS, black wire being negative, and middle wire being positive, and all other ways... connected and disconnected...
the connector on the TPS was super brittle and broke the second i touched it...
ideas and thoughts..?
http://www.bonnevilleclub.com/forum/...ic.php?t=22830
i figured id give it a shot cuz
1. nothing wrong with being faster...well kinda, anyways
2. some ppl talked about tranny problems being associated with the TPS... so what the hell...
now i get out there with my multimeter...
and if im correct this is my TPS right?
i have my ignition on, and i can get 12v from the battery, but i get nothing out of the TPS, black wire being negative, and middle wire being positive, and all other ways... connected and disconnected...
the connector on the TPS was super brittle and broke the second i touched it...
ideas and thoughts..?
#2
DINOSAURUS BOOSTUS
Expert Gearhead
It'* super brittle because of all the heat in that area over the years. W/O manual in hand I can't tell you that it'* the tps.
I agree though, more power is going to help the trannies you put into the car.
I agree though, more power is going to help the trannies you put into the car.
#5
Originally Posted by harofreak00
nevermind.....idiot alert...
i forgot to push the throttle cable...
i have over 4v, so im not touching it...
i forgot to push the throttle cable...
i have over 4v, so im not touching it...
#6
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
Posts: 9,130
Likes: 0
Received 0 Likes
on
0 Posts
I think for the mod you need to juice it up to a min imum of .4 volts but don't exceed 4.XX volts at WOT....I think
#8
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
Posts: 9,130
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CmptrNerd
Perhaps this is whats wrong with mine. Could the screws get loose?
#10
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
Posts: 9,130
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBost37
Nate...you sure there wasn't a screw loose?
My TB....Yes
Thread
Thread Starter
Forum
Replies
Last Post
big_news_1
Performance, Brainstorming & Tuning
26
01-27-2006 01:56 PM