UIM Where does this tube go?
03-29-2007, 06:52 PM
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Feb 2007
Location: Pittsburgh, Pa.
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
UIM Where does this tube go?
Hey members! I just purchased a dorman intake from Advance for $153. While looking through the box I see a 3/8" transparent tube attached to the new gasket. What does this tube attach to? I'm going to throw this uim in on sat. I sure HOPE some of my fellow members will be on line because I'm sure to have some questions like how do you get these fuel injectors out?? Thanks, Bob (Pgh. Pa.)
03-29-2007, 06:57 PM
#2
Junior Member
Posts like a Ricer Type-R
That'* to disperse the PCV spooge. The short bent end goes up the underside of the PCV/MAP standpipe. The long part clips into the gasket, pointing the tube towards the throttle body.
03-29-2007, 08:08 PM
#4
DINOSAURUS BOOSTUS
Expert Gearhead
Two.. being near and willing to go help is GREAT! That can be much better than having others that may have been through it a couple more times on a website. 
03-29-2007, 08:45 PM
#8
RIP
True Car Nut
You're welcome. I "stole" it out of this thread. 
http://www.bonnevilleclub.com/forum/...4311&highlight
http://www.bonnevilleclub.com/forum/...4311&highlight
03-29-2007, 10:36 PM
#9
Junior Member
Posts like a Ricer Type-R
Originally Posted by two bonnies
Send me a PM. I just did this and learned alot. I'm nearby but other members are MUCH more knowledgable than me.
03-30-2007, 08:48 AM
#10
Senior Member
Posts like a Turbo
Join Date: Nov 2006
Location: Northern WV
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
Please don't ever do this. The idea of a Forum is to keep the information public and accessible so everyone can benefit from it. Not just now, but in the future when new members search for information.