Throttle Body Cleaning
#11
Senior Member
True Car Nut
Thread Starter
Join Date: Feb 2005
Location: Brampton, Ontario
Posts: 3,014
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mortehl
Hang in there! The 95 is a good car and once you finally get past all these kinks you won't regret it!
Not sure on the size, but if you haven't figured it out by tonight, I'll get it to you.
Not sure on the size, but if you haven't figured it out by tonight, I'll get it to you.
Awwwwwww I feel a little better now.......thanks for letting me vent.
Yes Mortehi, can you get me the size cause I won't get it tonight.
#12
DINOSAURUS BOOSTUS
Expert Gearhead
Frank..
Take your time and get that bolt out. Soak it down with PB blaster a few times and let if have time to soak in well. Is there any bolt sticking out of the hole that you can grab with vise grips?
The screw will be metric.. if I remember correctly it'* about a 5.5mm with a 1pitch.
Whether or not a 95 is good has nothing to do with it. Let'* try and keep this one on topic for Frank and get him fixed up and running.
BTW.. you can clean the TB with all the sensors in as long as you pick up a throttle body cleaner that is sensor safe.
Take your time and get that bolt out. Soak it down with PB blaster a few times and let if have time to soak in well. Is there any bolt sticking out of the hole that you can grab with vise grips?
The screw will be metric.. if I remember correctly it'* about a 5.5mm with a 1pitch.
Whether or not a 95 is good has nothing to do with it. Let'* try and keep this one on topic for Frank and get him fixed up and running.
BTW.. you can clean the TB with all the sensors in as long as you pick up a throttle body cleaner that is sensor safe.
#13
Junior Member
Posts like a Ricer Type-R
#14
Senior Member
True Car Nut
Thread Starter
Join Date: Feb 2005
Location: Brampton, Ontario
Posts: 3,014
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
Frank..
Take your time and get that bolt out. Soak it down with PB blaster a few times and let if have time to soak in well. Is there any bolt sticking out of the hole that you can grab with vise grips?
The screw will be metric.. if I remember correctly it'* about a 5.5mm with a 1pitch.
Whether or not a 95 is good has nothing to do with it. Let'* try and keep this one on topic for Frank and get him fixed up and running.
BTW.. you can clean the TB with all the sensors in as long as you pick up a throttle body cleaner that is sensor safe.
Take your time and get that bolt out. Soak it down with PB blaster a few times and let if have time to soak in well. Is there any bolt sticking out of the hole that you can grab with vise grips?
The screw will be metric.. if I remember correctly it'* about a 5.5mm with a 1pitch.
Whether or not a 95 is good has nothing to do with it. Let'* try and keep this one on topic for Frank and get him fixed up and running.
BTW.. you can clean the TB with all the sensors in as long as you pick up a throttle body cleaner that is sensor safe.
Will, your site is excellent, unfortunately I didn't check before I started. I just didn't have the time to do the research, My Bad!
I don't think my Bonne Luv'* me anymore
Thread
Thread Starter
Forum
Replies
Last Post
ukie eagle
Performance, Brainstorming & Tuning
15
06-02-2005 09:45 PM
DeeGee96SE
Performance, Brainstorming & Tuning
5
06-29-2004 12:21 AM