wiper problem
#1
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Oct 2006
Location: montreal canada NEBF07 ONBF07
Posts: 987
Likes: 0
Received 0 Likes
on
0 Posts
wiper problem
whit are nice weather snow and ice my wiper stays in the up position when there off .i have try to clean the base and lower them by hand but they always come back straight up does anyone know why
#3
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Oct 2006
Location: montreal canada NEBF07 ONBF07
Posts: 987
Likes: 0
Received 0 Likes
on
0 Posts
no its after a snow storm the was a block of ice under my wiper and i think its the electronic modul that when caput the motor still work but the wiper are out a phase
#4
Senior Member
Posts like a Supercharger
Join Date: Jan 2007
Location: Missouri
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Can you pop them off the spindles like in this picture?
Then check the spindle operation without the arms.
Maybe the splines are stripped.
Then check the spindle operation without the arms.
Maybe the splines are stripped.
#5
Senior Member
Posts like a Turbo
Join Date: Nov 2006
Location: Springfield, MO
Posts: 463
Likes: 0
Received 0 Likes
on
0 Posts
I had the same thing happen to my Bonneville, used the wipers with ice under them now wont go down "all the way", someone suggested I bent the mechanism or wiper arm, never could check cause I am not going to take the whole top off to look at the arm. Could be your problem.
#6
Senior Member
Posts like a 4 Banger
Originally Posted by ohenry5
I had the same thing happen to my Bonneville, used the wipers with ice under them now wont go down "all the way", someone suggested I bent the mechanism or wiper arm, never could check cause I am not going to take the whole top off to look at the arm. Could be your problem.
You could fix this without removing the top of the cowl.
#8
Junior Member
Posts like a Ricer Type-R
Join Date: Jan 2006
Location: Warren MI
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
I think your problem is in the motor assembly. That is, something bent. Stripping splines in the wiper arms or bending the linkages never seems to happen.
#9
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Oct 2006
Location: montreal canada NEBF07 ONBF07
Posts: 987
Likes: 0
Received 0 Likes
on
0 Posts
Posted: Wed Nov 28, 2007 11:38 am Post subject:
--------------------------------------------------------------------------------
I think your problem is in the motor assembly. That is, something bent. Stripping splines in the wiper arms or bending the linkages never seems to happen.
--------------------------------------------------------------------------------
I think your problem is in the motor assembly. That is, something bent. Stripping splines in the wiper arms or bending the linkages never seems to happen.
Thread
Thread Starter
Forum
Replies
Last Post