92 SE How to remove front door panels
#1
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: Apr 2004
Location: Providence, RI
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
92 SE How to remove front door panels
Hola
I have an 92 SE and i was trying to remove the front driver and passenger doors to get acess to the speakers. I was able to get the clips all the way around the door, and the 2 bolts in the bottom right corner of the "map pocket", Now there are 2 more bolts behind the light that is in the door, and there is one more that seems to be right behind where the power mirror control is (this control is on the driver side door only, didnt try the passenger door). What am i missing to get this door panel off?
I have an 92 SE and i was trying to remove the front driver and passenger doors to get acess to the speakers. I was able to get the clips all the way around the door, and the 2 bolts in the bottom right corner of the "map pocket", Now there are 2 more bolts behind the light that is in the door, and there is one more that seems to be right behind where the power mirror control is (this control is on the driver side door only, didnt try the passenger door). What am i missing to get this door panel off?
#5
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: Apr 2004
Location: Providence, RI
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
ok i got the panels off, but i am having a HELLUVA time getting the power "lock slider" back on to the rod. Does anyone have any tips to get it back on? When i have the door, and the lock mechanism close enough to each other, theres no room to put my hand through the top or bottom of the door.
#6
I have done this a ton of times (that'* why I wrote the techinfo article ). I know what you mean about it being a PITA to get it back on. What I found is if you hold the dorr approximently where it will be, pop the rod thru the hole and then work it on the rod. Try putting the part that is flat on first and then slideing it up and down the rod until the hook at the end is at the right spot to snap into place. This make sence? If you try to do it all at once it will take you forever ro get it to snp into place.
If you havce trouble still let me know.
If you havce trouble still let me know.
Thread
Thread Starter
Forum
Replies
Last Post
psburtis
Audio (and aftermarket electronics)
3
06-30-2008 01:15 PM
ibanezcollector
Audio (and aftermarket electronics)
6
02-05-2005 06:48 PM
green95se
Audio (and aftermarket electronics)
9
01-30-2004 03:44 PM