Water injection info....
09-02-2002, 06:46 PM
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Water injection info....
Check out http://www.dawesdevices.com/water.html and let me know what you think.
I am in the process of building my own using a pressurized tank rather than a pump.
I am in the process of building my own using a pressurized tank rather than a pump.
09-03-2002, 05:35 AM
#2
Junior Member
Posts like a Ricer Type-R
Thread Starter
Water injection WORKS.
Built a prototype system in about 30 minutes. Keep in mind I'm Series1, with an M62 blower that could NEVER reach full boost. With the increased intake density and cooler air caused by the water injection, I'm hitting the hashmarks on the gauge.
Prototype 1 was a simple siphon system with a 1/2 pint water tank.
Prototype 2 will draw regulated (@5psi) air from my spare tire, and feed from a small pressurized water tank in the trunk. I'm building it right now. I should be able to do more in-depth testing with this system, with a full pint of water.
If this works out, my final system will be solonoid controlled with a 1-2 gallon tank.
Prototype 1 was a simple siphon system with a 1/2 pint water tank.
Prototype 2 will draw regulated (@5psi) air from my spare tire, and feed from a small pressurized water tank in the trunk. I'm building it right now. I should be able to do more in-depth testing with this system, with a full pint of water.
If this works out, my final system will be solonoid controlled with a 1-2 gallon tank.
Thread
Thread Starter
Forum
Replies
Last Post
rwe62382
Performance, Brainstorming & Tuning
1
08-30-2003 01:03 AM
willwren
Performance, Brainstorming & Tuning
4
09-11-2002 12:23 AM
