Transmission mounts
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Oct 2002
Location: Philadelphia, PA
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
Transmission mounts
They are getting really bad. I had to take off fast earlier and now I feel more movement. Anybody know the procedure for changing them or do I have to take to shop. Can I wait until Saturday to do this? What possible damage cld tke place?
#2
Junior Member
Posts like a Ricer Type-R
Just take it easy between now and then. Use a jack and a piece of wood to distribute the load as you raise it. Lift it just enough to take the weight off the mounts. Do them one at a time.
#3
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Oct 2002
Location: Philadelphia, PA
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
Does this procedure require loosing the motor mounts? Or I am strictly focusing the job on raising the engine enough to get to trans mounts and do I need any "SPECIAL" tools?
#4
Senior Member
Posts like a Turbo
Join Date: Jul 2002
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
You should just need a torque wrench to torque the mounts down to the proper specs when you are done.
Autozone loans out torque wrenches for a 100 or so dollar deposit.
Autozone loans out torque wrenches for a 100 or so dollar deposit.
#7
Junior Member
Posts like a Ricer Type-R
Should be 5:
Trans strut mount 22175156
Upper brace 25536013
Lower brace 25619904
Front mount 22175154
Rear mount 22145828
These parts are very model/year dependent. This is specifically for a 95 SSEi. Nobody else but that year and model should use these numbers. You may not want to mess with the braces. Just the mounts.
Trans strut mount 22175156
Upper brace 25536013
Lower brace 25619904
Front mount 22175154
Rear mount 22145828
These parts are very model/year dependent. This is specifically for a 95 SSEi. Nobody else but that year and model should use these numbers. You may not want to mess with the braces. Just the mounts.
Thread
Thread Starter
Forum
Replies
Last Post
dbtk2
Performance, Brainstorming & Tuning
1
09-11-2008 06:53 AM
killer_cr80r
Lounge
2
04-14-2004 05:18 PM