code 102 and traction off
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Mar 2003
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
code 102 and traction off
I've finally purchased a code scanner. It comes up with code 102 and the traction off light comes on.
The symptoms are extremely rough idle (especially on warm start up) and sometimes stalling. The RPMs will then go up to 3500 before leveling out. The traction off light goes on and off infrequently while driving. I sometimes feel a slight stumble when it comes on.
I've been advised to check the fuel pressure regulator, but have not had the chance.
I'm wondering if the traction off light and the rough idle are related?
Any experts have any advice?
The symptoms are extremely rough idle (especially on warm start up) and sometimes stalling. The RPMs will then go up to 3500 before leveling out. The traction off light goes on and off infrequently while driving. I sometimes feel a slight stumble when it comes on.
I've been advised to check the fuel pressure regulator, but have not had the chance.
I'm wondering if the traction off light and the rough idle are related?
Any experts have any advice?
#7
I need to see the service manual specifically for your car.
You may really have low air flow volume, or you may have a sensor that is telling you that you have low air flow volume. The air goes through the throttle body, and the sensor is located there.
This could be caused by a restriction somewhere in the system, such as a dirty air fliter or a plugged screen. It could also be caused by a dirty throttle body or a dirty/bad idle air control valve. It could also be caused by a bad mass airflow sensor.
That'* why I need to know exactly what triggers that code.
You may really have low air flow volume, or you may have a sensor that is telling you that you have low air flow volume. The air goes through the throttle body, and the sensor is located there.
This could be caused by a restriction somewhere in the system, such as a dirty air fliter or a plugged screen. It could also be caused by a dirty throttle body or a dirty/bad idle air control valve. It could also be caused by a bad mass airflow sensor.
That'* why I need to know exactly what triggers that code.
#8
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Mar 2003
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the reply. I changed the filter and cleaned the throttle body. All I can say about the sensor is that it looks ok.
After playing around with it today I noticed something strange. The traction off light being on seems directly related to the P0102 code and rough idle. As soon as the traction off light goes out, I am abe to clear the code. When the light comes back on, I am unable to clear the code.
Any thoughts????
After playing around with it today I noticed something strange. The traction off light being on seems directly related to the P0102 code and rough idle. As soon as the traction off light goes out, I am abe to clear the code. When the light comes back on, I am unable to clear the code.
Any thoughts????
Thread
Thread Starter
Forum
Replies
Last Post