Reprogramming the Keyless remote for 1993 SSEI
Funny thing happened to me. I was at a parking lot when a grand prix parked next to my 1993 SSEI Bonneville and when the owner of the Grand Prix popped opened his Trunk, it opened mine as well. In that instant my Keyless remote stopped working while his opened and closed all my locks and trunk. Now that my keyless remote stopped working, I want to reprogram it back to recognize my keyless remote. I looked on this website on how to reprogram my remote and i was confused. The DATA Link is it the same thing as the socket you plug in the OBD I scanner. My Data Link socket I believe is a 16 terminal socket like an OBDII. If it is the same one, then which numbers should I link together with a paper clip, because the directions on this form is still unclear: 1) Find the data link connector under the edge of the dashboard, an open
socket with two rows of ports in it. Using any handy jumper wire (a bent
paper clip will do), jumper together the upper-right and lower-left ports to
put the car into programming mode . The upper right and lower left ports are which numbers on the terminal.
1993 SSEI Bonneville,in Bright white factory paint with aerolite factory wheels, stage 2 jet performance computer ECM, Heavy duty cryogenic crossed drilled police interceptor front disc rotors with extreme 911 pads, upgraded MSD ignition coils, NGK uridium spark plugs- replaced with Nology Silver spark plugs( The best), K&N air cleaner, JVC 12 CD disc changer and Sirrus radio.