Replacing Cam sensor, got it replaced, missing magnet??.....
#11
Junior Member
Thread Starter
Join Date: Apr 2006
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
****. It'* gone. I was turning the engine, and it happened to stop at the cam sensor hole. Stuck my finger in the hole, I feel no magnet in the sprocket. I have a feeling it'* in the oil pan, as I have a few neomydium magnets stuck to the pan. I would assume the magnet is a dealer part? I can't find it on Advance'* site. :?
#12
Junior Member
Join Date: May 2006
Location: BonnevilleHell
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
It'* probably sold as part of the timing gear (i.e., not intended to be removed ) Unless someone else pipes up with a part number, I would hit a dealer and try to get a number for just the magnet alone. Otherwise, somebody on the list might have a spare camshaft timing gear that a magnet can come off of.
Really, changing it isn't a big deal. It'* not like the oilpan has to come off, or the motor needs to be lifted off the mounts to get to it. A couple of hours worth of work and you are back in business with a new timing chain set.
Really, changing it isn't a big deal. It'* not like the oilpan has to come off, or the motor needs to be lifted off the mounts to get to it. A couple of hours worth of work and you are back in business with a new timing chain set.
#13
Senior Member
Posts like a Turbo
Join Date: Jul 2007
Location: Joplin, Missouri
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
This is common on our Vin C motors as well. Heres a link to a write-up over on LeSabreT. It should at least cover the basics of how to change it out if you haven't figured it out for yourself yet.
http://lesabret.com/phpBB/viewtopic.php?t=5896
The rear of that magnet looks an awful lot like the vin C magnet... I wonder if its the same part? If you can find a picture of just the magnet for your engine I can post a pic of just the magnet for the vin C engine.
http://lesabret.com/phpBB/viewtopic.php?t=5896
The rear of that magnet looks an awful lot like the vin C magnet... I wonder if its the same part? If you can find a picture of just the magnet for your engine I can post a pic of just the magnet for the vin C engine.
#15
Senior Member
True Car Nut
Join Date: Sep 2006
Location: Bloomington, MN
Posts: 3,693
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
GoldenBullet
Forum updates and suggestions
14
04-28-2008 09:18 PM
Sprig
Everything Electrical & Electronic
3
06-17-2006 10:13 AM