1992-1999 Series I L27 (1992-1994 SE,SLE, SSE) & Series II L36 (1995-1999 SE, SSE, SLE) and common problems for the Series I and II L67 (all supercharged models 92-99) Including Olds 88's, Olds LSS's and Buick Lesabres Please use General Chat for non-mechanical issues, and Performance and Brainstorming for improvements.

Random Stalling issue

Thread Tools
 
Search this Thread
 
Old 02-20-2016, 02:21 PM
  #1  
Junior Member
Posts like a Ricer Type-R
Thread Starter
 
Stridenttube's Avatar
 
Join Date: Sep 2013
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Stridenttube is on a distinguished road
Default Random Stalling issue

I have a random stalling issue on my 1994 Bonneville that I just can't figure out.

In the morning at times the car will idle really high and want to take off on it'* own, the gauges will jump as well and the chime will do 3 short dings and then the check engine light will flash once quickly. Other times the check engine light will be lit right after starting the car. At times it will try to stall and the gauges on the dash will jump quickly and then go back to normal.

CPS and TPS have already been replaced. I'm wondering if it'* a ground issue but both ground busses in the driver and passenger footwells were fine. I cleaned them just in case but they were pretty flawless.

What else could this be? It'* very random, sometimes it will go a few weeks without issue and sometimes it will stall 4 times in just a few short miles.

Any ideas?
Old 02-20-2016, 03:14 PM
  #2  
Retired



Certified Car Nut
 
Mike's Avatar
 
Join Date: Jul 2003
Location: Dark Side, AZ
Posts: 17,920
Received 1,780 Likes on 1,304 Posts
Mike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond repute
Default

How'* the battery connections?
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel

Old 02-20-2016, 03:23 PM
  #3  
Junior Member
Posts like a Ricer Type-R
Thread Starter
 
Stridenttube's Avatar
 
Join Date: Sep 2013
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Stridenttube is on a distinguished road
Default

Battery connections are good, the battery cable is fairly new and has no signs or corrosion. I should also mention that the alternator and battery are also both good. Car starts right back up after stalling.
Old 02-21-2016, 09:13 AM
  #4  
Senior Member
Posts like a Turbo
 
Mad_Coachman's Avatar
 
Join Date: Dec 2003
Location: Baldwin,New York
Posts: 245
Received 39 Likes on 29 Posts
Mad_Coachman will become famous soon enoughMad_Coachman will become famous soon enough
Default

Originally Posted by Stridenttube
Battery connections are good, the battery cable is fairly new and has no signs or corrosion. I should also mention that the alternator and battery are also both good. Car starts right back up after stalling.
Don't assume that your battery connections are good just because it starts up ok. Take apart the positive cable and clean ALL connections there. If the original red plastic cover is still there it can retain moisture and corrosion may be hiding underneath it.
Old 02-21-2016, 01:07 PM
  #5  
Junior Member
Posts like a Ricer Type-R
Thread Starter
 
Stridenttube's Avatar
 
Join Date: Sep 2013
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Stridenttube is on a distinguished road
Default

Originally Posted by Mad_Coachman
Don't assume that your battery connections are good just because it starts up ok. Take apart the positive cable and clean ALL connections there. If the original red plastic cover is still there it can retain moisture and corrosion may be hiding underneath it.
Cable is brand new, and I still experienced these issues with the old cable.

Could it be the ICM is bad?
Old 02-23-2016, 06:43 AM
  #6  
Senior Member
Posts like a Turbo
 
Mad_Coachman's Avatar
 
Join Date: Dec 2003
Location: Baldwin,New York
Posts: 245
Received 39 Likes on 29 Posts
Mad_Coachman will become famous soon enoughMad_Coachman will become famous soon enough
Default

You have to get it scanned for codes....unfortunately it'* a 94 and you'll probably have to take it to a mechanic with a scanner that can read cars prior to 96.
It very well could be the ICM but at $125-$230 for a brand new ICM I think you need a proper diagnosis.
Old 02-23-2016, 07:06 AM
  #7  
Senior Member

True Car Nut
 
WilliamE's Avatar
 
Join Date: Jun 2011
Location: VA
Posts: 3,462
Received 573 Likes on 504 Posts
WilliamE has a reputation beyond reputeWilliamE has a reputation beyond reputeWilliamE has a reputation beyond reputeWilliamE has a reputation beyond reputeWilliamE has a reputation beyond reputeWilliamE has a reputation beyond reputeWilliamE has a reputation beyond reputeWilliamE has a reputation beyond reputeWilliamE has a reputation beyond reputeWilliamE has a reputation beyond reputeWilliamE has a reputation beyond repute
Default

Check this link out for diagnosing your ICM, it does not list your model, but the test should still be valid, you have the exact same ICM as I do, and the test is valid for my 96' Park Ave.

Part 1 -GM 3.8L Ignition Control Module and Crank (3X, 18X) Sensor Test

Or if you have a local auto-parts store nearby try taking it to them, they should test it for you, I am not sure if you have to remove it or not, but if so they are easy to remove, just make sure you label your plug wires, and maybe take a pic of coil pack orientation just in case,
Old 03-22-2016, 09:49 AM
  #8  
Junior Member
 
jrdnsmif's Avatar
 
Join Date: Mar 2016
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
jrdnsmif is on a distinguished road
Default Possibly

Originally Posted by Stridenttube
Cable is brand new, and I still experienced these issues with the old cable.

Could it be the ICM is bad?
I have a '98 Bonnie.
I had most of those issues a few months back, blinkers didn't always work, missfired, dings every few minutes.

Ended up fixing it by switching out the ICM for a used one out of a junk yard. Cost $60.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1G2HZ54
2000-2005
6
10-16-2009 04:05 PM
Mattock
1992-1999
11
04-14-2006 07:48 PM
ClearDark
1987-1991
4
10-17-2005 10:01 AM
Satchmo
1992-1999
6
11-18-2003 10:32 PM
osx
1992-1999
8
09-30-2002 08:28 AM



Quick Reply: Random Stalling issue



All times are GMT -4. The time now is 07:12 PM.