programing keyfob
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Dec 2007
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
programing keyfob
So I was in the auto wreckers over the weekend looking for a new upper intake manifold mine kinda melted lol. Anyways after wasting about 20 minutes to rip one off it was worse then mine. So i gave up for the day but before i left i searched through some cars and scored 2 new key fobs i broke mine about a month ago. The numbers match and everything so i'm assuming they work. I just wanted to verify that these are the correct instructions...
1998 Buick LeSabre - Free Keyless Remote Fob Entry programming instructions, procedures for all automotive vehicles
or is there and easier way? also if i jump those 2 ports is it safe to use a paper clip as a jumper?
Thanks
1998 Buick LeSabre - Free Keyless Remote Fob Entry programming instructions, procedures for all automotive vehicles
or is there and easier way? also if i jump those 2 ports is it safe to use a paper clip as a jumper?
Thanks
#2
DINOSAURUS BOOSTUS
Expert Gearhead
I use either wire or a clip myself. however the absolute safest way is a fused jumper.
Looks good, enjoy those new FOB'*. And I'd suggest getting an UIM from Rockauto or another parts supplier.
Looks good, enjoy those new FOB'*. And I'd suggest getting an UIM from Rockauto or another parts supplier.
#4
Senior Member
Posts like a 4 Banger
Join Date: Apr 2009
Location: Southern Minnesota
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Yeah just use a paper clip. Also, they ARE NOT numbered. It is the two closest to the drivers door. Took me awhile to figure out which ones were #4 and #8
#5
Member
Posts like a V-Tak
Thread Starter
Join Date: Dec 2007
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
thanks bud i was just checking it out and wow everyone else wants like 300 for a new uim one they only want 81 dollars what a difference
#7
Member
Posts like a V-Tak
Thread Starter
Join Date: Dec 2007
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
So my car is back up and running and did i ever get a wicked deal. basically i paid 130 bucks i got a brand new uim,gasket,pcv,o rings for the injectors,o ring for the brake booster, all that **** it came in a kit together. pretty sweet eh?
Thread
Thread Starter
Forum
Replies
Last Post
radomirthegreat
Everything Electrical & Electronic
8
12-24-2007 12:45 AM