lamp monitor
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Jul 2003
Location: toronto
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
lamp monitor
Well i had my lamp monitor come on today, everytime i pushed the brake it would go dind ding, and i checked all my brake lights, (says brake light) and they are all on, anyhone know how to reset it or what i should do? or could do? i am running all sock lights, no leds. thanks guys.
#2
Senior Member
Certified GM nut
u sure all brake lights were working...even the little 194'* or the 3rd brake light?? just an idea...i actually don't have this option (whats a lamp monitor??)
#3
Pull out all the rear bulbs and check them to make sure the filiment inside isn't broken and clean all the contacts thouroughly. It might not be a bad bulb but a bad connection.
If that doesn't work go buy a single rear bulb and start swapping it in one at a time until you replace the one that makes the dinging stop.
If that doesn't work go buy a single rear bulb and start swapping it in one at a time until you replace the one that makes the dinging stop.
#6
Member
Posts like a V-Tak
Thread Starter
Join Date: Jul 2003
Location: toronto
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Actually i got my son to push on the brake peddle for me
Ended up being a bad fillent in the middle rear window bulb, and one of those peanut bulbs 194'* in the trunk lid, all is well now, thanks for your help guys.
Ended up being a bad fillent in the middle rear window bulb, and one of those peanut bulbs 194'* in the trunk lid, all is well now, thanks for your help guys.
#7
yeah i had the lamp monitor go on me and it looked like they were all working. it turned out to be one bulb that had two filaments (dont know which one) and one filament burnt out.
#8
Senior Member
Certified GM nut
Originally Posted by zzzzzeke
Originally Posted by fuddyduddy121
How did you check them by yourself?
#9
Member
Posts like a V-Tak
Join Date: Sep 2003
Location: Ontario
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Re: lamp monitor
Originally Posted by bonneville1992
Well i had my lamp monitor come on today, everytime i pushed the brake it would go dind ding, and i checked all my brake lights, (says brake light) and they are all on, anyhone know how to reset it or what i should do? or could do? i am running all sock lights, no leds. thanks guys.
When I replaced it, the monitor did not go out right away, but it appeared to need a trip or two before it accepted that " everything was okay now".
Thread
Thread Starter
Forum
Replies
Last Post