need help fast!
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Apr 2008
Location: South Bend Indiana
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
need help fast!
I am trying to get the starter out of my 98 ssei and can't figure out how to get the inspection cover of the starter. goit it off the flywheel but can't figure out how to get it off starter thanks
#2
Junior Member
Join Date: May 2006
Location: BonnevilleHell
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Re: need help fast!
If I recall correctly, it isn't attached to the starter. Take out all the dust cover bolts on the transmission and the cover drops straight down, revealing the nose of the starter..as well as the two bolts attaching the starter to the block.
If the cover is one piece, then there are three bolts holding it on (two on the bottom, one on the side). If it is a two piece, then there are four bolts (three for the main cover, and a 4th on the front side of the transaxle case for the 2nd piece of the cover.)
If the cover is one piece, then there are three bolts holding it on (two on the bottom, one on the side). If it is a two piece, then there are four bolts (three for the main cover, and a 4th on the front side of the transaxle case for the 2nd piece of the cover.)
Thread
Thread Starter
Forum
Replies
Last Post