Need pics.
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Jan 2005
Location: Melbourne, FL
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Need pics.
Could someone with a 97 SSEi, and a 98/99 SSEi take a few pictures of the firewall connection for the engine wiring harness (the one behind the alternator, under the plastic cover). I need to compare the pin setup to my 96 so I can figure out what year harness would be the easiest to use for my tranny swap. Thanks.
#2
DINOSAURUS BOOSTUS
Expert Gearhead
Aaron..you'll need the manuals for that. Or since you are looking for 97, PM Randman1...he mapped that connector out during the Frankenbonne swap.
#4
DINOSAURUS BOOSTUS
Expert Gearhead
Honestly..the look of the harness is the same... big square black plastic with a spaghetti mess of wires.
ELMACHOGERACHO also has done a lot of research and there was another person..I forget their name. Search on wiring harness and elmacho... you'll findi it.
ELMACHOGERACHO also has done a lot of research and there was another person..I forget their name. Search on wiring harness and elmacho... you'll findi it.
#5
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Jan 2005
Location: Melbourne, FL
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, they all do look the same in that sense. I was hoping the part where it plugs in is the same. I have a junked wiring harness from a '97 Riviera, and the setup was almost identical with the exception of one wire/plug, so I'm hoping that the harness from a '97 SSEi will be a perfect match.
#6
DINOSAURUS BOOSTUS
Expert Gearhead
Ahhh... most likely yes. Randman was making a connector of sorts to convert the 97 to a 90 and I think he found a 91 at the yard. A few wires were in different cavities..but it was all good in the end.
#7
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Jan 2005
Location: Melbourne, FL
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
This is really the last problem that needs to be worked out before I can go ahead with the swap here in a few weeks, and going with a 97 computer and harness should minimize the amount of rewiring that needs to be done. Lots of pics will be taken during the swap of course.
Thread
Thread Starter
Forum
Replies
Last Post
RamSus_2K_SSEI
Your Ride: GM Pictures & Videos
30
11-15-2003 12:14 PM
BonneAlien
Your Ride: GM Pictures & Videos
15
04-05-2003 01:32 AM
bonnie94ssei
Your Ride: GM Pictures & Videos
8
03-25-2003 04:42 PM
shortstuf212559
Your Ride: GM Pictures & Videos
21
02-16-2003 06:34 PM