Need 96 PCM help.
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: May 2003
Location: B'ham.AL
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
Need 96 PCM help.
Need 96 PCM information.
I am trying to find a spare PCM for my 96 Regal 3800 II.
If I can find a PCM out of another 96 Regal 3800 II car will it still have to reprogrammed at a GM dealership?
If you have replaced a 96 PCM, please any info will help.
I am trying to find a spare PCM for my 96 Regal 3800 II.
If I can find a PCM out of another 96 Regal 3800 II car will it still have to reprogrammed at a GM dealership?
If you have replaced a 96 PCM, please any info will help.
#2
Senior Member
Posts like a Supercharger
Join Date: Mar 2006
Location: Chicago
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
If the car has a Pass Key II ignition system where the key has a little black thing in the middle, then it probably won't work. I know in my '96 PA another '96 PCM would would allow the car the crank over, but it wouldn't fuel the engine bacause it wasn't recieving the proper signal from the ignition key and Pass Key module.
I'm not really familiar with what would need to be done to get another PCM to run in your car, but I wouldn't hold any confidance in the extra PCM working without doing anthing other than changing the PCMs.
I'm not really familiar with what would need to be done to get another PCM to run in your car, but I wouldn't hold any confidance in the extra PCM working without doing anthing other than changing the PCMs.
#3
Junior Member
Posts like a V-Tak
Join Date: Oct 2003
Location: Rochester, NY
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
i replaced my pcm in my 96 bonneville and called around to see what needed to be done and everyone told me that i needed to have it programmed according to my vin.....i bought a reman from auto zone, all programmed for a littler over 100 bucks after core charges were taken back....
#5
Senior Member
Posts like a Supercharger
Join Date: Mar 2006
Location: Chicago
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
I think you could get another PCM to work if you do a security relearn procedure, but I'm not sure how do do that on your car (or my car). I tried the procedure for the 1997 and up Bonnevilles on my car, but it didn't work right.
Thread
Thread Starter
Forum
Replies
Last Post
fly_ssei
Everything Electrical & Electronic
3
09-18-2006 06:33 PM
GolfYeti
Forced Induction
7
06-29-2006 11:00 AM