where is the knock sensor located on a '95 SE?
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Sep 2005
Location: rural central ohio
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
where is the knock sensor located on a '95 SE?
My car is running poorly lately since the motor swap. For one, it'* running very rich and galloping while idling in gear. Also not wanting to start. The CEL is on, so I had it scanned last night. One code was for the knock sensor voltage. Another for the EGR, another for the 02 sensor. I found the EGR cleaning procedure and will take care of that. I'll also replace the O2 sensor. Where can I find the knock sensor?
#2
Guest
Posts: n/a
Is this a 95 SE with the 3800 Series II engine?
If it is it has a knock sensor on both banks
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
If it is it has a knock sensor on both banks
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#3
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Sep 2005
Location: rural central ohio
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
yes.....it'* a 3800 series II
would the scan specify which bank was giving the bad reading or would I need to just check/replace both?
would the scan specify which bank was giving the bad reading or would I need to just check/replace both?
#4
Guest
Posts: n/a
Originally Posted by farmboy
yes.....it'* a 3800 series II
would the scan specify which bank was giving the bad reading or would I need to just check/replace both?
would the scan specify which bank was giving the bad reading or would I need to just check/replace both?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Thread
Thread Starter
Forum
Replies
Last Post
94BonneSSEi
1992-1999
1
06-06-2004 01:45 AM