92 ssei bushings
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Dec 2005
Location: raleigh nc
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
92 ssei bushings
can anyone tell me where on the net i can get some good bushing to replace the dried out busted up ones that are currently under my car. I noticed some poping noise and jacked her up. the bushing for the front sway bar were crumbling, i am thinking i should just replace all the bushing. I will probably do the struts too at the same time. I didn't know if there was a package deal you guys know about.
thanks
thanks
#2
Senior Member
Certified GM nut
Join Date: Sep 2005
Location: Home Sweet Home in New York
Posts: 2,009
Likes: 0
Received 0 Likes
on
0 Posts
Re: 92 ssei bushings
Originally Posted by pdqSSEi
can anyone tell me where on the net i can get some good bushing to replace the dried out busted up ones that are currently under my car. I noticed some poping noise and jacked her up. the bushing for the front sway bar were crumbling, i am thinking i should just replace all the bushing. I will probably do the struts too at the same time. I didn't know if there was a package deal you guys know about.
thanks
thanks
http://www.bonnevilleclub.com/forum/...rgy+suspension
I have the part numbers in there for the swaybar endlink bushings. I strongly reccomend you upgrade to the Energy Suspension version. They get rid of the boaty feeling and offer a much tighter feel.
#3
DINOSAURUS BOOSTUS
Expert Gearhead
Actually the long but super informative thread is this one
The Ringy Dingy Endlink Thread
It pretty much comes down to 8105 and 8120 Energy Suspension bushings found at Autozone'* and other parts stores. For the rears the bolts can be replaced with factory replacement botls obtained at your dealer or Grade 8 hardened 3.5" x 3/8 botls with Nylock insert acorn nuts.
The Ringy Dingy Endlink Thread
It pretty much comes down to 8105 and 8120 Energy Suspension bushings found at Autozone'* and other parts stores. For the rears the bolts can be replaced with factory replacement botls obtained at your dealer or Grade 8 hardened 3.5" x 3/8 botls with Nylock insert acorn nuts.
#5
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Re: 92 ssei bushings
Originally Posted by pdqSSEi
can anyone tell me where on the net i can get some good bushing to replace the dried out busted up ones that are currently under my car. I noticed some poping noise and jacked her up. the bushing for the front sway bar were crumbling, i am thinking i should just replace all the bushing. I will probably do the struts too at the same time. I didn't know if there was a package deal you guys know about.
thanks
thanks
#7
Member
Posts like a V-Tak
Thread Starter
Join Date: Dec 2005
Location: raleigh nc
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Re: 92 ssei bushings
Originally Posted by 1993 SLE
Originally Posted by pdqSSEi
can anyone tell me where on the net i can get some good bushing to replace the dried out busted up ones that are currently under my car. I noticed some poping noise and jacked her up. the bushing for the front sway bar were crumbling, i am thinking i should just replace all the bushing. I will probably do the struts too at the same time. I didn't know if there was a package deal you guys know about.
thanks
thanks
btw: i called autozone and napa looking for those bushing and those people couldn't find a hole in the ground. had no idea what i was looking for and didn't want to put forth and effort to try. will try again tomorrow.
Thread
Thread Starter
Forum
Replies
Last Post
TommyGloves
Performance, Brainstorming & Tuning
2
07-25-2005 01:34 PM