Is this scanner good to read my codes?
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Feb 2005
Location: Brampton, Ontario
Posts: 3,014
Likes: 0
Received 0 Likes
on
0 Posts
Is this scanner good to read my codes?
Here is a picture of the scanner, although I don't have the proper connector yet. I actually borowed it.
#3
Senior Member
True Car Nut
Thread Starter
Join Date: Feb 2005
Location: Brampton, Ontario
Posts: 3,014
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
That is what the dealer uses for OBD1 vehicles.
#4
Guest
Posts: n/a
Originally Posted by Maymybonneliveforever
Originally Posted by willwren
That is what the dealer uses for OBD1 vehicles.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#6
Junior Member
Posts like a Ricer Type-R
Originally Posted by Maymybonneliveforever
Will mentioned "That is what the dealer uses for OBD1 vehicles" does that mean it will also read ABS codes?
Thanks jr's3800
Thanks jr's3800
#7
Senior Member
True Car Nut
Thread Starter
Join Date: Feb 2005
Location: Brampton, Ontario
Posts: 3,014
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
Originally Posted by Maymybonneliveforever
Will mentioned "That is what the dealer uses for OBD1 vehicles" does that mean it will also read ABS codes?
Thanks jr's3800
Thanks jr's3800
Thanks for the info Will,
#8
Junior Member
Join Date: Sep 2006
Location: Calgary, AB, Canada
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Clearing the SDM (Airbag Module)
Has anyone had the pleasure of having deployed Air bags in a 96 SSEi ?
I was told that it says in the Service manual that if the airbags deploy you have to change them and the front sensor but not the SDM module under the passenger seat.
You do have to clear the codes from the SDM however and I'm wondering what tool/scanner I need to get to do this job.
I did buy another SDM from Ebay from a non deployed car, but am still waiting for it to arrive.
I'm wondering if I can just reuse the current SDM (I have it out of the car now and am scared to install it in case the bags deploy by themselves).
Thx for any advice...
Please PM me as I have emails turned off due to the huge volume
I was told that it says in the Service manual that if the airbags deploy you have to change them and the front sensor but not the SDM module under the passenger seat.
You do have to clear the codes from the SDM however and I'm wondering what tool/scanner I need to get to do this job.
I did buy another SDM from Ebay from a non deployed car, but am still waiting for it to arrive.
I'm wondering if I can just reuse the current SDM (I have it out of the car now and am scared to install it in case the bags deploy by themselves).
Thx for any advice...
Please PM me as I have emails turned off due to the huge volume
Thread
Thread Starter
Forum
Replies
Last Post