How much trans. fluid after filter change?
#2
Senior Member
Posts like a Northstar
Join Date: Feb 2005
Location: Ocean County, New Jersey
Posts: 541
Likes: 0
Received 0 Likes
on
0 Posts
If you mean how much fluid needs to be replaced after you drop the pan and change the filter its 6-6.5 qts for the 4t65e transmission. Should be close to there for 4t60e.
#4
Senior Member
True Car Nut
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
The spec is 6 quarts
I just did mine last night, i measured what came out, and it was indeed 6 quarts, so thats what went back in, took it for a 10 minute drive, checked it, and it was right on the Full
I just did mine last night, i measured what came out, and it was indeed 6 quarts, so thats what went back in, took it for a 10 minute drive, checked it, and it was right on the Full
#6
Senior Member
True Car Nut
Join Date: Apr 2004
Location: Three Oaks, Michigan
Posts: 4,879
Likes: 0
Received 0 Likes
on
0 Posts
if you do decide to drive the car, be sure to bring a quart or two of fluid in the trunk, just in case. Probably a funnel too.. it'* kinda hard to fill up ATF without one . And whenever I add fluid to my transmission, I like it at 3/4 full on the crosshatched area. That way it'* definitely not going to run low, and not going to overfill it. Same thing with engine oil.
-justin
-justin
#8
DINOSAURUS BOOSTUS
Expert Gearhead
Re: reading the level
Originally Posted by james tharp
I have a hard time reading the level... Are there any secrets or am I just color blind or something?
#10
Guest
Posts: n/a
I have used as much as 7 quarts after a filter change
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote