1992-1999 Series I L27 (1992-1994 SE,SLE, SSE) & Series II L36 (1995-1999 SE, SSE, SLE) and common problems for the Series I and II L67 (all supercharged models 92-99) Including Olds 88's, Olds LSS's and Buick Lesabres Please use General Chat for non-mechanical issues, and Performance and Brainstorming for improvements.

Hesitates when warm

Thread Tools
 
Search this Thread
 
Old 12-27-2006, 09:15 AM
  #1  
Member
Posts like a V-Tak
Thread Starter
 
Bigfoot's Avatar
 
Join Date: Oct 2006
Location: Indy
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts
Bigfoot is on a distinguished road
Default Hesitates when warm

My Bonneville SOMETIMES hesitates when accelerating from a dead stop. It feels like it is either not getting enough gas or not enough ignition advance. Here are some facts:

    Any ideas?
    Old 12-27-2006, 09:21 AM
      #2  
    DINOSAURUS BOOSTUS

    Expert Gearhead
     
    BillBoost37's Avatar
     
    Join Date: Mar 2005
    Location: Enfield, CT
    Posts: 41,391
    Likes: 0
    Received 8 Likes on 8 Posts
    BillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of light
    Default

    When was the last tune up of plug, wires etc?
    Have you ever removed and cleaned the throttle body?
    What plugs/wires are currently on the car?
    Old 12-27-2006, 09:24 AM
      #3  
    Senior Member
    True Car Nut
     
    bill buttermore's Avatar
     
    Join Date: Mar 2004
    Location: Ames, Iowa
    Posts: 3,066
    Likes: 0
    Received 3 Likes on 3 Posts
    bill buttermore is on a distinguished road
    Default

    My '95 FSM gives these possibilities for hesitation: ('98 FSM may be different?)

    TPS or wiring
    Oxygen sensor
    Fuel pressure
    Contaminated fuel
    EVAP canister purge system
    Fuel injectors
    Spark plugs, wires
    Ignition system ground (ICM mounting bolts)
    Correct PROM
    Thermostat proper heat range and functioning
    Air leaks between MAF sensor and throttle body
    Old 12-27-2006, 11:12 AM
      #4  
    Member
    Posts like a V-Tak
    Thread Starter
     
    Bigfoot's Avatar
     
    Join Date: Oct 2006
    Location: Indy
    Posts: 69
    Likes: 0
    Received 0 Likes on 0 Posts
    Bigfoot is on a distinguished road
    Default

    Good questions. Here are some answers:
      Old 12-27-2006, 11:16 AM
        #5  
      DINOSAURUS BOOSTUS

      Expert Gearhead
       
      BillBoost37's Avatar
       
      Join Date: Mar 2005
      Location: Enfield, CT
      Posts: 41,391
      Likes: 0
      Received 8 Likes on 8 Posts
      BillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of light
      Default

      Honestly..

      It could easily be wires and plugs. Bosch doesn't work well on a waste spark system. (Good read around here recently). At the least..I'd be inclined to have you pull the plugs and check them.

      Edit: Bosch info is imbedded in this thread.
      http://www.bonnevilleclub.com/forum/...c.php?p=765279
      Old 12-27-2006, 11:59 AM
        #6  
      Senior Member
      True Car Nut
       
      bandit's Avatar
       
      Join Date: Jan 2006
      Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
      Posts: 8,029
      Likes: 0
      Received 0 Likes on 0 Posts
      bandit is on a distinguished road
      Default

      Does it also do it when you just give it a little gas when you first take off?

      and does it do it if you hold the brake and give it just a bit of gas?

      if so, you might have had the same problem as me, it was the EGR.
      Old 12-27-2006, 12:43 PM
        #8  
      DINOSAURUS BOOSTUS

      Expert Gearhead
       
      BillBoost37's Avatar
       
      Join Date: Mar 2005
      Location: Enfield, CT
      Posts: 41,391
      Likes: 0
      Received 8 Likes on 8 Posts
      BillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of light
      Default

      Originally Posted by jr's3800
      Replace the Bosch plugs, with either NGK, Ac Delco or Autolites... And then get back to us
      Psst..Don.. the plugs are AC.. wires are Bosch..
      Old 12-27-2006, 12:46 PM
        #9  
      Member
      Posts like a V-Tak
      Thread Starter
       
      Bigfoot's Avatar
       
      Join Date: Oct 2006
      Location: Indy
      Posts: 69
      Likes: 0
      Received 0 Likes on 0 Posts
      Bigfoot is on a distinguished road
      Default

      The plugs are not Bosch, but the plug wires are.

      The plugs are AC 41-921. They look OK, but are quite old.

      Bandit, I have not tried holding the brake and giving it gas, but it does it with just a little or a lot of gas pedal.

      I just replaced the EGR too about 1k miles, along with a new o-ring.

      Billboost; I read the thread you refered to. Since my Bonny is normally aspirated it appears that I can go with any of the plugs. What would you recommend?
      Old 12-27-2006, 12:49 PM
        #10  
      DINOSAURUS BOOSTUS

      Expert Gearhead
       
      BillBoost37's Avatar
       
      Join Date: Mar 2005
      Location: Enfield, CT
      Posts: 41,391
      Likes: 0
      Received 8 Likes on 8 Posts
      BillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of lightBillBoost37 is a glorious beacon of light
      Default

      If you are looking for a longer maintenance schedule the Iridiums. If you want lower cost..TR55'* or AC Delco copper equivalents.


      Quick Reply: Hesitates when warm



      All times are GMT -4. The time now is 10:44 AM.