need help
#1
Junior Member
Thread Starter
Join Date: Oct 2003
Location: Gary indiana
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
need help
How do u put a fender back onto a 93 bonny because every time i attempt to put one on my bonny it leaves a big gap between the fender and the hood
#2
Senior Member
True Car Nut
Join Date: Nov 2002
Location: Texarkana, Texas
Posts: 6,042
Likes: 0
Received 0 Likes
on
0 Posts
Oh let me tell you........ It'* dificult.
You got the inner fender well off right? cause you need that off.... Then you put the fender on, close the hood slowly and carefully, then get all you reveals as close as you can, tighten it down, put the inner fender well back.... I've had my fender on and off a few times (can't drive in texas without one.... well you can't getcaught driving without it....) and this is the way I've done it.
You got the inner fender well off right? cause you need that off.... Then you put the fender on, close the hood slowly and carefully, then get all you reveals as close as you can, tighten it down, put the inner fender well back.... I've had my fender on and off a few times (can't drive in texas without one.... well you can't getcaught driving without it....) and this is the way I've done it.
#4
Senior Member
Certified GM nut
Join Date: Apr 2003
Location: Davison,Michigan
Posts: 1,867
Likes: 0
Received 0 Likes
on
0 Posts
I am guessing it isnt the original part. If so the size may very on every single car made and isnt guarenteed to fit your car... So that might also be the prob bob..
Thread
Thread Starter
Forum
Replies
Last Post
Custom88
Everything Electrical & Electronic
10
06-22-2004 10:58 PM